pompa centrifuga tipo jetting

The self-priming centrifugal pump Jetting type, sucking the water is able to develop up to 7 bar pressure, excellent for irrigation, is produced by Tecno Wellpoint in many versions, single-stage and multistage, and adaptable to the various requirements.

For the driving of the Wellpoint, it is used in sandy, loamy or clay soils because thanks to his strong jet of water can provide holes in the ground allowing the wellpoint to penetrate to the desired depth.

While, in more compact soils, the use of jetting is accompanied by a Hydraulic drill, always supplied by Tecno Wellpoint, which creates the hole so quick and easy.

Capacity Q
	1000	1100	1200	1400	1600	1800	2000	2200	2400

Head H
1750 g/min	161,5	159,5	159	152	148,5	147	153	150	143,5
2000 g/min	205	206	203	198	196,5	191,5	188	182,5	183
2200 g/min	221	222,5	219,5	214	212,5	206	201	193,5	190

Curve pompa jetting

SPECIFICATIONS:

Centrifugal pump type Jetting mounted on wheels type PCQ / OR 100 D / S (four-stage).
Suction Diameter Ø 120 with flange and ball joint M.
Delivery diameter Ø 100 with flange and ball joint M.
Max capacity: 2.800 lt. at Mt. 120 of prevalence.
Diesel engine : Same type 6-cylinder or Fiat Aifo HP 100 - cooling air or water.
Equipment: two-wheels or on a trailer.
Complete with electric battery of 100 AM.

Ask for further consultations sheets in contact.