The submersible electric pumps are particularly suitable for the emptying of basements, garages, cellars and flooded premises. The submersible electric pumps F 42XM-62XM-82XM-82XT are also designed for lifting screened waste water, owing to the open vortex impeller.

Max temperature of the liquid pumped 40° C – Max immersion depth 20 mt – PH of the liquid pumped 6-10

Motor casing, motor shaft, bolts and nuts in stainless steel. Cover, pump casing, pedestal and impeller in cast iron. Mechanical seal in ceramic graphite plus a seal ring on the motor shaft.

The electric motor is asynchronous, single phase and three phase – Insulation class F. Protection degree IP 68.

For the lifting of clear and dirty water. They are especially used in building yards and for pumping abrasive liquids.

The 2600 , owing to their particular characteristic of construction are adapted for pumping mud and drilling waste.

The 22K2, owing to their great capacity, are used in harbour works, dam construction.

Max temperature of the liquid pumped 40°C – Max immersion depth 20ml – PH of the liquid 5-8

Cover, Motor shaft,  strainer in stainless steel.

Mechanical seal, motor side, in ceramic graphite with  sealing ring motor shaft.

The electric motor is asynchronous single phase and three phase. Class of insulation F. Protection degree IP 68

Is suitable for pumping screened waste water, draining the sewage of blocks of flats and houses and flooded premises in general

Max temperature of liquid pumped 40° C – Max immersion depth 20 m. - ph of the liquid pumped 6-10

Motor casing , motor shaft, bolts and nuts in stainless steel.

Cover, pump casing, pedestal  in cast iron.

Mechanical seal, motor side, in ceramic graphite with seeling ring motor shaft.

Is asynchronous single phase and three phase. Insulation class F. Protection degree IP 68.

Suitable for the lifting of clear and dirty water. They can be used as portable pumps either in building yards, basement tanks or for fixed installation with electric panel and float switch.

Max temperature of the liquid pumped 40° C- Max immersion depth 20ml – PH of the liquid pumped 5-8

Motor casing , motor shaft, bolts and nuts in stainless steel.

Cover, pump casing, foot of support in cast iron.

Mechanical seal, motor side, in ceramic graphite with seeling ring motor shaft

Is asynchronous single phase and three phase. Insulation class F. Protection degree IP 68.

Particularly adapted for pumping industrial sewage, screened waste water and mud in pumping stations. they can be used also to lift clear and dirty water and rain water.

Max temperature of the liquid pumped 40° C- Max immersion depth 20m. – PH of the liquid pumped 5-8

Motor casing , motor shaft, bolts and nuts in stainless steel.

Cover, pump casing, foot of support in cast iron.

Mechanical seal, motor side, in ceramic graphite with seeling ring motor shaft

Is asynchronous single phase and three phase. Insulation class F. Protection : IP 68.

Used in civil and industrial sewage plants.

The cutter unit, in a special hard S.S., allows for cutting into small pieces threadlike materials contained in the liquids. As the risk of clogging is avoided small diameter pipes are used.

Max temperature of liquid pumped 40° C completely immersed – max immersion depth 20 mt - PH of the liquid pumped 6-10

Motor casing , motor shaft, bolts and nuts in stainless steel.

Cover, pump casing, pedestal  in cast iron.

Mechanical seal, motor side, in ceramic graphite with+ oil  seal

Is asynchronous single phase and three phase. Insulation class F. Protection degree IP 68.

This series of grinder pumps are particularly used in civil and industrial sewage plants. The cutter unit in a special hard S.S., allows for cutting small pieces threadlike materials contained in the liquid.

Max temperature of liquid pumped 40° C completely immersed – max immersion depth 20 mt - PH of the liquid pumped 6-10

Motor casing , motor shaft, bolts and nuts in stainless steel.

Cover, pump casing, pedestal  in cast iron.

Mechanical seal, motor side, in ceramic graphite with+ oil  seal

Is asynchronous single phase and three phase. Insulation class F. Protection degree IP 68.